£325.00 plus VAT

CPS Leak Detector 134a & 1234yf

The all new Leak-Seeker II featuring E_MOS technology. Packed with unique design features the new Leak-Seeker II from CPS is one of the best leak detectors you can find – truly an Innovation in Design™.

Key Features:

  • Microprocessor controlled sensor electronics utilising a multi channel signal detection method, improves sensitivity while reducing false alarm
  • New E_MOS® sensor technology incorporates a proprietary pulse modulation design to increase both battery and sensor liferm
  • Software managed sensor rejuvenation mode, automatically initiated at each start up ensures the highest level of sensitivity every use, for up to 500 hours of detecting leaks of less than .1 oz per year
  • Sensitivity remains constant over the life of the sensor
  • Dynamic signal analysis and automatic sensitivity control, enables the Leak-Seeker® II to make quick work of any leak regardless of its size or the refrigerant type…without operator intervention
  • The only leak detector with fully automatic sensitivity selection and control
  • Sensitivity to 35 parts per million (less than .01 oz per year)
  • Meets or exceeds all UK and International standards
  • Superior sensitivity to R410A and new HFO refrigerants
  • Sensor not contaminated by R404a
  • Senses all refrigerants including those with hydrocarbon components
  • 500 hours sensor life
  • 50 hour battery life (3 C batteries)
  • 2 year warranty


CPS LDA1000H Leak Detector 134a & 1234yf

Sensor: CPS Leak Detector has state of the art E_MOS™ technology.

Gases: Sensitive to all types of refrigerants: HFC’s, CFC’s, HCFC’s as well as all halogenated vapors and gases such as SF6.

Sensitivity: Better than a 0.1 oz / year (3 g / annually) for all common refrigerants, including R-410a, R-404a and R-407a.

Audible Alarms: A bar-graph LED display shows the relative leak size in each of 7 possible ranges. Each range is indicated by a numbered LED. Each range is automatically selected by the instrument starting with highest sensitivity and automatically switching to lower sensitivities as the leak source is approached.

Operating Temperature: -18 to 60˚C (0 to 140˚F)

Power: Three size “C” alkaline batteries (NEDA/ ANSI 14A).

Battery Life: 50 hours minimum at 77˚F (25˚C). Battery life depends on cell chemistry and ambient conditions. Alkaline batteries provide longest life. Cold ambient conditions decrease battery life. The LeakSeeker ® II turns itself off after 10 minutes of inactivity—START button not pressed—to further prolong battery life.

Dimensions: Instrument (L x W x H): 10″ x 2.3″ x 2″ 254mm x 59mm x 51mm Probe: 15″ (380mm) long, .25″ (6.4mm)diameter.

Weight: 1 lb 2 oz (500 g)