Description
Technical specifications and functions
Integrated engine control system with multipoint petrol injection system (MPI);
Monitoring operation of fuel supply system, injected fuel quantity, spray pattern quality, fuel pressure of the fuel pump;
Fuel pump is built into a transparent tank what allows to see its operation;
Adjustable air flow rate simulator demonstrates the function of the mass – air flow meter and air temperature sensor;
Visible work process of spark plugs;
Easy access to high voltage measurements;
Manual adjustment of the engine crankshaft speed;
Ability to change the air/fuel mixture by the oxygen sensor signal simulator;
The training board has a complete electric wiring diagram of multipoint petrol injection system (MPI);
Electric wiring diagram with built in banana plug jumpers for measurements and simulation of the system fault codes;
Ability to simulate more than 20 faults by disconnecting Banana plug jumpers;
Diagnostic and measurement
Oscilloscope/multimeter
System’s parameters are measured by connecting to the banana connector
Ability to measure electrical signal parameters of each system component (such as sensor or actuator)
Ability to measure high voltage circuit of the ignition system
Control unit diagnosis
Diagnosis through OBD 16 – pin diagnostic connector
Electronic control unit (ECU) identification; Reading/erasing fault codes
Displaying the operating system parameters (live data)
Activating the actuators (depends on the control unit)
Throttle valve adaptation
Control unit encoding/configuration
Other
The stand has a closed structure – internal wiring is not visible
Power supply: 12V from the battery or power supply unit (battery and power supply unit are not included as standard accessories)
Dimensions approx. (HxLxW): 1820 x 1360 x 500 mm
Nett weight approx.: 70 Kg
Made in EU
CE certificate
Optional accessories
Examination console for 10 hidden fault simulations
12 V battery
220/12 V power supply unit
OBD diagnostic scan tool
